,

JL Audio M600/1 Amplifier


SKU: 000-13841-001 Categories: , Tags: , , ,

$601.99 incl. GST

OVERVIEW

Monoblock Class D Marine Subwoofer Amplifier, 600 W x 1 @ 2 Ω / 400 W x 1 @ 4 Ω – 14.4V

This potent monoblock amplifier employs our high-speed NexD™ switching design to achieve unprecedented efficiency and amazing power output in a very compact chassis. Don’t let the small size fool you, though… this amplifier is capable of serious subwoofer power, delivering a full 600 W of continuous power into a 2 Ω load (14.4V, 1% THD)

SPECIFICATIONS

Rated Continuous (RMS) Power @ 14.4V


@ 4 Ω
400 W RMS x 1

@ 3 Ω
500 W RMS x 1

@ 2 Ω
600 W RMS x 1

@ 1.5 Ω
N/A

 

Rated Continuous (RMS) Power @ 12.5 V


@ 4 Ω
300 W RMS x 1

@ 3 Ω
400 W RMS x 1

@ 2 Ω
500 W RMS x 1

@ 1.5 Ω
N/A

 

General Specifications


Frequency Response
7 Hz – 500 Hz (+0, -1dB)

S/N Ratio, referred to highest rated power
>87 dB below rated power (A-weighted, 20 Hz – 20 kHz noise bandwidth)

S/N Ratio, referred to 1 W
>59 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth)

Damping Factor @ 4 Ω
>1000 / 50 Hz

Damping Factor @ 2 Ω
>500 / 50 Hz

THD+N @ Rated Power
<1% @ 2 Ω per Ch.

Input Voltage Range @ RCA Inputs
100 mV – 4 V RMS

Min.Copper Power / Ground Wire Gauge
4 AWG wire

Fuse Rating
50 A (AFS, AGU or MaxiFuse™)

 

Signal Processing


Filter Mode(s)
Low-Pass only

Filter Slope(s)
12/24 dB/octave

Filter Frequency Range
50 Hz – 500 Hz

Detented, Calibrated Filter Freq. Potentiometer
Yes

Filter Defeat Function
Yes

Remote Level Control
30 Hz, defeatable

Remote Level Modes
No

Channel Input Mode Switch
No

Pass-Through Preamp Output
Optional (HD-RLC)

Source Channel Selection for PreOuts
Buffered

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “JL Audio M600/1 Amplifier”

There are no reviews yet.

SHOPPING CART

close